New!
Ground Power Unit VR Training
Ground Power Unit VR Training
Ground Power Unit VR Training
Practical GPU Training in Virtual Reality: Inspect, Operate and Power Aircraft Safely
In use at innovative airports and trusted by industry leaders
"Every step is explained clearly and in detail, making it easy to learn the procedures before going outside"
Trainee, Airline Assistance Switzerland BER
Highlights of the VR Training Module
Key outcomes of the Ground Power Unit Virtual Reality Training.
Safe Aircraft Powering
Precise Aircraft Procedures
Control Mastery
Safety Under Pressure
Trains correct positioning, cable handling and safe power delivery so trainees gain confidence before operating real GPUs
Covers the full connect and disconnect sequences with cockpit confirmation, following IATA AHM and EASA guidelines.
Practice ignition, engine, and power output control hands-on, including emergency shutdown procedures.
Experience fault scenarios like damaged plugs, fuel shortages, or cable hazards to strengthen risk awareness.
Safe Aircraft Powering
Precise Aircraft Procedures
Control Mastery
Safety Under Pressure
Trains correct positioning, cable handling and safe power delivery so trainees gain confidence before operating real GPUs
Covers the full connect and disconnect sequences with cockpit confirmation, following IATA AHM and EASA guidelines.
Practice ignition, engine, and power output control hands-on, including emergency shutdown procedures.
Experience fault scenarios like damaged plugs, fuel shortages, or cable hazards to strengthen risk awareness.
Safe Aircraft Powering
Precise Aircraft Procedures
Control Mastery
Safety Under Pressure
Trains correct positioning, cable handling and safe power delivery so trainees gain confidence before operating real GPUs
Covers the full connect and disconnect sequences with cockpit confirmation, following IATA AHM and EASA guidelines.
Practice ignition, engine, and power output control hands-on, including emergency shutdown procedures.
Experience fault scenarios like damaged plugs, fuel shortages, or cable hazards to strengthen risk awareness.
Ground Power Unit Training in Virtual Reality: Lesson Overview
Ground Power Unit Training in Virtual Reality: Lesson Overview
Lesson 01
GPU Basics
As the first lesson, trainees explore the Ground Power Unit’s (GPU) structure and components, building the essential foundation before learning controls, inspections, or powering an aircraft.
6-8 min | Initial Training
View Details
Lesson 01
GPU Basics
As the first lesson, trainees explore the Ground Power Unit’s (GPU) structure and components, building the essential foundation before learning controls, inspections, or powering an aircraft.
6-8 min | Initial Training
View Details
Lesson 01
GPU Basics
As the first lesson, trainees explore the Ground Power Unit’s (GPU) structure and components, building the essential foundation before learning controls, inspections, or powering an aircraft.
6-8 min | Initial Training
View Details
Lesson 02
Controls
Trainees learn the essential Ground Power Unit (GPU) controls, including ignition, engine, power output, and emergency stop, plus how to monitor key display indicators for safe aircraft operation.
5-7 min | Initial Training
View Details
Lesson 02
Controls
Trainees learn the essential Ground Power Unit (GPU) controls, including ignition, engine, power output, and emergency stop, plus how to monitor key display indicators for safe aircraft operation.
5-7 min | Initial Training
View Details
Lesson 02
Controls
Trainees learn the essential Ground Power Unit (GPU) controls, including ignition, engine, power output, and emergency stop, plus how to monitor key display indicators for safe aircraft operation.
5-7 min | Initial Training
View Details
Lesson 03
Walkaround
Trainees learn to perform a complete GPU walkaround, checking key components, spotting faults, and practicing safe inspection routines to ensure equipment readiness and prevent delays.
8-11 min | Initial Training
View Details
Lesson 03
Walkaround
Trainees learn to perform a complete GPU walkaround, checking key components, spotting faults, and practicing safe inspection routines to ensure equipment readiness and prevent delays.
8-11 min | Initial Training
View Details
Lesson 03
Walkaround
Trainees learn to perform a complete GPU walkaround, checking key components, spotting faults, and practicing safe inspection routines to ensure equipment readiness and prevent delays.
8-11 min | Initial Training
View Details
Lesson 04
Theory Exam
Trainees test their knowledge of GPU Basics and Controls in a multiple-choice exam. It checks safe operation, equipment readiness, and correct sequencing before moving on to aircraft power.
4-6 min | Initial Training
View Details
Lesson 04
Theory Exam
Trainees test their knowledge of GPU Basics and Controls in a multiple-choice exam. It checks safe operation, equipment readiness, and correct sequencing before moving on to aircraft power.
4-6 min | Initial Training
View Details
Lesson 04
Theory Exam
Trainees test their knowledge of GPU Basics and Controls in a multiple-choice exam. It checks safe operation, equipment readiness, and correct sequencing before moving on to aircraft power.
4-6 min | Initial Training
View Details
Lesson 05
Provide Power at the Aircraft
Trainees learn the full procedure for connecting a Ground Power Unit (GPU) to an aircraft, covering positioning, startup, cable connection, and cockpit confirmation for safe external power delivery.
7-9 min | Initial Training
View Details
Lesson 05
Provide Power at the Aircraft
Trainees learn the full procedure for connecting a Ground Power Unit (GPU) to an aircraft, covering positioning, startup, cable connection, and cockpit confirmation for safe external power delivery.
7-9 min | Initial Training
View Details
Lesson 05
Provide Power at the Aircraft
Trainees learn the full procedure for connecting a Ground Power Unit (GPU) to an aircraft, covering positioning, startup, cable connection, and cockpit confirmation for safe external power delivery.
7-9 min | Initial Training
View Details
Lesson 06
Remove Power at the Aircraft
Trainees learn to safely disconnect a Ground Power Unit (GPU) from an aircraft, covering cockpit confirmation, shutdown, cable removal, and cone clearance for a safe and tidy apron.
10-13 min | Initial Training
View Details
Lesson 06
Remove Power at the Aircraft
Trainees learn to safely disconnect a Ground Power Unit (GPU) from an aircraft, covering cockpit confirmation, shutdown, cable removal, and cone clearance for a safe and tidy apron.
10-13 min | Initial Training
View Details
Lesson 06
Remove Power at the Aircraft
Trainees learn to safely disconnect a Ground Power Unit (GPU) from an aircraft, covering cockpit confirmation, shutdown, cable removal, and cone clearance for a safe and tidy apron.
10-13 min | Initial Training
View Details
Lesson 07
Practical Exam
Trainees validate their knowledge of connecting and disconnecting GPU power at the aircraft. The exam tests sequencing, cockpit coordination, and safety to ensure readiness for real operations.
9-11 min | Initial Training
View Details
Lesson 07
Practical Exam
Trainees validate their knowledge of connecting and disconnecting GPU power at the aircraft. The exam tests sequencing, cockpit coordination, and safety to ensure readiness for real operations.
9-11 min | Initial Training
View Details
Lesson 07
Practical Exam
Trainees validate their knowledge of connecting and disconnecting GPU power at the aircraft. The exam tests sequencing, cockpit coordination, and safety to ensure readiness for real operations.
9-11 min | Initial Training
View Details
“Because it really bridges the gap between theory and practice”
Marco Tusnat, Training Development Manager AAS Berlin
Frequently asked questions
What skills are gained in the GPU VR Training module?
The GPU VR training module teaches ground-handling staff how to operate a Ground Power Unit safely and effectively at the aircraft. Trainees learn essential skills such as positioning and chocking the GPU, operating ignition and power controls, handling the heavy power cable, and coordinating with cockpit crew using IATA hand signals. The module also covers walkaround inspections to identify faults, hazard awareness, and the correct connection and disconnection sequences. This ensures staff develop the technical confidence and procedural discipline needed for safe aircraft power delivery, aligned with IATA AHM guidelines.
What skills are trained in the Belt Loader VR Training module?
Trainees learn safe posture, correct bag handling, and timing across all key positions. The module builds coordination between aircraft, belt loader, and baggage cart to support efficient and injury-free baggage flow.
What skills are trained in the Belt Loader VR Training module?
Trainees learn safe posture, correct bag handling, and timing across all key positions. The module builds coordination between aircraft, belt loader, and baggage cart to support efficient and injury-free baggage flow.
Are the GPU Training lessons videos to watch?
No, the GPU training lessons are not videos to watch. Draxon’s VR modules are fully interactive scenarios in which trainees actively perform tasks, make decisions, and receive real-time feedback. This hands-on approach reinforces correct behavior in operational environments and provides a more effective learning experience compared to passive video-based training.
Are the Belt Loader Training lessons videos to watch?
No, the belt loader training lessons are not videos to watch. Draxon’s VR modules are fully interactive scenarios in which trainees actively perform tasks, make decisions, and receive real-time feedback. This enables realistic, hands-on learning instead of passive viewing and helps reinforce correct behavior in operational environments.
Are the Belt Loader Training lessons videos to watch?
No, the belt loader training lessons are not videos to watch. Draxon’s VR modules are fully interactive scenarios in which trainees actively perform tasks, make decisions, and receive real-time feedback. This enables realistic, hands-on learning instead of passive viewing and helps reinforce correct behavior in operational environments.
Can the GPU VR Training module help reduce time needed for classroom training?
Yes, Draxon’s GPU VR training can significantly reduce the need for traditional classroom instruction. Trainees actively apply procedures in realistic apron environments and receive immediate feedback when mistakes occur. This accelerates knowledge transfer, improves procedural understanding, and reduces the length and frequency of theoretical briefings.
Can the Belt Loader VR Training module help reduce time needed for classroom training?
Yes, Draxon’s Belt Loader VR training can significantly reduce the need for traditional classroom theory sessions. Trainees actively apply procedures in realistic apron environments and get real-time feedback when mistakes occur. This hands-on approach accelerates knowledge transfer and procedural understanding, making theoretical briefings shorter, more focused, and less frequent.
Can the Belt Loader VR Training module help reduce time needed for classroom training?
Yes, Draxon’s Belt Loader VR training can significantly reduce the need for traditional classroom theory sessions. Trainees actively apply procedures in realistic apron environments and get real-time feedback when mistakes occur. This hands-on approach accelerates knowledge transfer and procedural understanding, making theoretical briefings shorter, more focused, and less frequent.
What are the benefits of the GPU VR Training for real-world operations?
The GPU VR training prepares staff for ramp operations by letting them practice every step of powering an aircraft: positioning the GPU, starting the unit, handling the cable, confirming with cockpit crew, and disconnecting safely. In VR, mistakes can be made and corrected without risk, helping staff internalize routines faster and reduce the likelihood of costly errors when operating on the real apron.
What are the benefits of the Belt Loader VR Training for real-world operations?
The Belt Loader VR training prepares staff for real-world ramp operations by allowing them to practice safety procedures, positioning, and equipment handling in a fully immersive environment. Mistakes can be made and corrected virtually, helping trainees internalize correct routines faster and reducing the risk of costly errors once they work on the real apron.
What are the benefits of the Belt Loader VR Training for real-world operations?
The Belt Loader VR training prepares staff for real-world ramp operations by allowing them to practice safety procedures, positioning, and equipment handling in a fully immersive environment. Mistakes can be made and corrected virtually, helping trainees internalize correct routines faster and reducing the risk of costly errors once they work on the real apron.
Can people with a tendency to motion sickness do the GPU VR training?
Yes, most people with a tendency to motion sickness can use the GPU VR training without discomfort. Less than 3% of trainees typically report symptoms. Draxon’s VR training modules are designed for stable apron environments with smooth movement and intuitive interactions, keeping the experience comfortable while maintaining high training value.
Can people with a tendency to motion sickness do the Belt Loader VR training?
Yes, most people with a tendency to motion sickness can use the Belt Loader VR training without discomfort. Less than 3% of trainees report any symptoms. Draxon’s training modules are designed for immersive learning in realistic ramp environments with purposeful, smooth movement. This keeps the experience focused and comfortable while delivering maximum training value.
Can people with a tendency to motion sickness do the Belt Loader VR training?
Yes, most people with a tendency to motion sickness can use the Belt Loader VR training without discomfort. Less than 3% of trainees report any symptoms. Draxon’s training modules are designed for immersive learning in realistic ramp environments with purposeful, smooth movement. This keeps the experience focused and comfortable while delivering maximum training value.
Is the GPU VR Training applicable for initial training?
Yes, the GPU VR Training is fully applicable for initial training. It introduces new hires to apron procedures such as GPU positioning, chocking, startup, cable handling, and cockpit coordination in a safe virtual environment. Step-by-step guidance and real-time feedback help trainees build the foundational skills required before operating a GPU at the aircraft.
Is the belt loader VR training applicable for initial training?
Yes, the Belt Loader VR Training is fully applicable for initial training. It introduces new hires to apron procedures, driving, positioning, and equipment handling in a safe virtual environment. Step-by-step guidance and real-time feedback help trainees build foundational skills before operating real equipment.
Is the belt loader VR training applicable for initial training?
Yes, the Belt Loader VR Training is fully applicable for initial training. It introduces new hires to apron procedures, driving, positioning, and equipment handling in a safe virtual environment. Step-by-step guidance and real-time feedback help trainees build foundational skills before operating real equipment.
Is the GPU VR Training applicable for recurrent training?
Yes, the GPU VR Training supports recurrent training by helping experienced staff refresh safety routines, operational sequencing, and procedural accuracy. Realistic scenarios and error-handling exercises promote consistent standards and maintain readiness for certified ground-handling teams.
Is the Belt Loader VR Training applicable for recurrent training?
Yes, the Belt Loader VR Training supports recurrent training by helping experienced staff refresh safety routines, driving behavior, and procedural accuracy. Realistic scenarios and error handling promote consistent standards and operational readiness for certified ground-handling teams.
Is the Belt Loader VR Training applicable for recurrent training?
Yes, the Belt Loader VR Training supports recurrent training by helping experienced staff refresh safety routines, driving behavior, and procedural accuracy. Realistic scenarios and error handling promote consistent standards and operational readiness for certified ground-handling teams.
Is the GPU VR Training aligned with IATA standards?
Yes, the GPU VR Training is developed in close alignment with IATA AHM 1110 and IGOM guidelines. Trainees practice standardized GPU procedures such as positioning, inspection, and power connection routines that reflect IATA-compliant ramp operations, ensuring safe and regulation-oriented ground handling performance.
Is the Belt Loader VR Training aligned with IATA standards?
Yes, the Belt Loader VR Training is developed in close alignment with IATA AHM 1110 and IGOM guidelines. Trainees practice standardized procedures and positioning routines that reflect IATA-compliant ramp operations, supporting consistent, safe, and regulation-oriented ground handling performance.
Is the Belt Loader VR Training aligned with IATA standards?
Yes, the Belt Loader VR Training is developed in close alignment with IATA AHM 1110 and IGOM guidelines. Trainees practice standardized procedures and positioning routines that reflect IATA-compliant ramp operations, supporting consistent, safe, and regulation-oriented ground handling performance.
Is the GPU VR Training aligned with EASA standards?
Yes, the training design is aligned with EASA safety principles. The GPU VR module incorporates safety-critical routines and apron procedures that reflect the intent of EASA operational training guidelines, supporting hazard awareness and safe behavior in live operations.
Is the Belt Loader VR Training module aligned with IATA and EASA standards?
Yes. The training is based on IATA AHM1110 and developed in close alignment with IATA and EASA safety standards. It supports compliance with apron safety protocols and ground handling procedures through realistic, standards-driven training content.
Is the Belt Loader VR Training aligned with EASA standards?
Yes, the training design is aligned with EASA safety principles. The Belt Loader VR module incorporates safety-critical routines and apron procedures that reflect the intent of EASA operational training guidelines, supporting risk awareness and safe behavior in live environments.
Ready to transform ground handling training?
Ready to transform ground handling training?
Ready to transform ground handling training?
Improve training effectiveness and raise safety standards with VR training.